Recently, in the fields of architectural decoration, home and commercial engineering, as well as rail transit glass processing, curved glass has been widely applied due to its smooth curved texture and transparent visual effect. Most custom requesters commonly face problems such as non-standard dimension marking, missing parameters and data deviations, resulting in glass processing rework and installation adaptation failures. Industry technical experts have sorted out general industry standards and detailed the methods to specify dimensions for custom curved glass, providing standardized references for procurement, design and construction personnel.

1. Clarify Core Basic Dimension Parameters and Standardize Marking Logic

Different from ordinary flat glass, curved glass cannot be marked only with length and width data. It is necessary to define four core parameters: arc length, chord length, arch height and bending radius, with all parameters uniformly measured in millimeters (mm). The arc length refers to the actual length of the curved edge of curved glass; the chord length is the linear distance between the two endpoints of the arc; the arch height, also known as sagitta, means the vertical distance from the highest point of the arc to the chord line; the bending radius is a key indicator to determine the arc radian and a core limiting parameter for processing equipment.

2. Match Compliant Bending Radius According to Glass Thickness

The bending radius is the most critical limiting parameter in customized dimensions. The glass thickness directly determines the threshold of the minimum bending radius. The thicker the glass, the larger the achievable minimum bending radius and the higher the difficulty of radian forming. General industry standards clarify that for curved glass with thickness ≤ 6mm, the minimum bending radius shall not be lower than 1200mm; for glass with thickness ≥ 8mm, the minimum bending radius shall reach 1600mm; the basic threshold of the minimum bending radius for regular processing is 400mm, and special process customization requires advance verification of processing capacity.

3. Conduct Scientific Measurement and Calibration, and Reserve Installation Adaptation Margin

During the on-site measurement stage, staff shall accurately locate the two fixed points of the arc and record the original arc length data by fitting measurement. To adapt to the frame installation and sealing gluing process, margins shall be reduced during customized ordering. The regular glass arc length is recommended to be deducted by 15mm-20mm to avoid glass jamming and extrusion damage. Meanwhile, processing size errors shall be strictly controlled: the cutting error of regular hot-bent glass shall not exceed 1mm, and the radian matching deviation between tempered curved glass and window frame shall not be greater than 2mm.

4. Classify Glass Types and Complete Dimension Marking List

In the customization process, it is necessary to clarify the glass category, as hollow curved glass, laminated curved glass and single-piece tempered curved glass have different processing standards. In addition to basic radian dimensions, the customized marking list shall also indicate glass thickness, layers and edge processing methods, as well as the installation orientation to distinguish inner and outer arcs and avoid processing direction errors. Industry insiders remind that for special-shaped curved glass with oversized size and ultra-small radius, it is required to verify the production capacity with the processing factory in advance to prevent processing failure.

5. Industry Summary

At this stage, curved glass is widely used in building curtain walls, curved doors and windows, decorative partitions, bathroom facilities and other scenarios. Standardized dimension specification methods can effectively reduce processing loss, shorten the installation period and improve the finished product adaptability. The industry suggests that custom requesters should abandon the habit of single length and width marking, completely mark core radian parameters, reserve processing margins combined with thickness and installation environment, and strictly abide by industry processing restriction standards to ensure the finished product quality and service safety of curved glass.

(This article is an industry popular science information without commercial brand implantation, and all data adopt general industry processing standards.)

At this stage, curved glass is widely used in building curtain walls, curved doors and windows, decorative partitions, bathroom facilities and other scenarios. Standardized dimension specification methods can effectively reduce processing loss, shorten the installation period and improve the finished product adaptability. The industry suggests that custom requesters should abandon the habit of single length and width marking, completely mark core radian parameters, reserve processing margins combined with thickness and installation environment, and strictly abide by industry processing restriction standards to ensure the finished product quality and service safety of curved glass.